[. . . ] Other safety information is contained in the Safety, Warranty and Regulatory Information booklet supplied with this product and should be read prior to setting up the printer. 2 Press firmly on the blue lock (1) to release the orange transport restraint. [. . . ] 2 Press firmly on the blue lock (1) to release the orange transport restraint. 3 Pull the transport restraint out in the direction of the arrow (2). 2 Fan the paper to be loaded then tap the edges of the stack on a flat surface to make it flush. 3 Load paper (face down and top edge towards the front for letterhead paper). Remove the backing from the VELCRO® strip on the back of the Handy Reference Guide and apply the guide to the printer. Note: Printer operation is not assured if another USB compatible device is connected concurrently with it. Note: If you are using USB, select BARTSCHER USB and disregard step 4. 5 Click on the utilities and downloads you want to install and follow the instructions. Activate Optional Accessories If your printer has an optional second paper tray, or duplex unit, you must open the printer driver and activate the device. Use the Web Page to Configure the Printer If you are working in a TCP/IP-enabled environment, you can use a web browser to display the printer or job printing status and to change settings. [. . . ] Activate Optional Accessories If your printer has an optional second paper tray, or duplex unit, you must open the printer driver and activate the device. Use the Web Page to Configure the Printer If you are working in a TCP/IP-enabled environment, you can use a web browser to display the printer or job printing status and to change settings. [. . . ]